Outdoor 19 Rack Enclosure Rectifier System , Base Station Telecom
Power System
Quick Details:
| Place of Origin: Shenzhen, China (Mainland) | Input Voltage: AC220V |
| Brand Name: ESTEL | Output Voltage: DC48V |
| Model Number: GPE4890B | Output Current: 90A |
| Product Name: Telecom Rectifier System | Input Frequency 45~65Hz |
| Certification: ISO9001, CE, 3C, FCC, TLC | Input Current: 29.7A |
| Installation Mode: cabinet 19” rack | Power Factor: 0.98 |
| Application: outdoor telecom cabinet | Components: 3×30A rectifier module, 1×monitoring module, power distribution |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | L/C, D/A, D/P, , T/T, Western Union |
| Supply Ability: | 10,000 sets per month |
| Delivery Time: | 7-10 working days |
| Packaging Details: | carton/wooden case |
1. Application
(1) Small scale program controlled exchanger
(2) Access network
(3) Transmission equipment
(4) Mobile communication
(5) Satellite communication ground station
(6) Microwave communication
2. Features
(1) Adoption of active power factor compensation technology with
factor ＞0.98
(2) Wide operating range of AC input voltage: 90~280Vac
(3) Operating temperature range:-25°C~+55°C
(4) Zero current/voltage switching tech with high efficiency ≥90%
(5) Perfect battery management, charge&discharge management,
battery temperature compensation, low voltage protection, battery
capacity test
(6) Hot-swappable
(7) Input over/under voltage protection
(8) Output over voltage protection
(9) Output over current protection
(10) Output short circuit protection
(11) Auto current sharing, parallel operation
(12) Embedded mounted
3. GPE4890B System Configuration
GPE4890B consists of distribution unit, rectifier module (up to 3
sets) and 1 monitoring module. The configuration is optional, as
following table:
| Configuration | Rectifier Module | Monitoring Module | Power Distribution |
| Optional 1 | GPR4830A | GPM48D (Without Ethernet Port) | GPE4890B: DC Output: 40A×4 (load); Battery Output: 70A×1 (battery) |
| Optional 2 | GPR4810A |
| Optional 3 | GPR4815A |
| Optional 4 | GPR4820A |
4. GPE4890B Operating Principle
Under normal conditions, every parameter of rectifier modules and
distribution unit are all under control of the monitoring module,
operating according to the pre-set parameter or user’s commands. If
AC mains fault, the system will be powered by the battery. With the
battery discharge, the terminal voltage of the battery starts to
descend. When the battery voltage is under 42V±0.5V, the monitoring
module reports battery under voltage alarm signal and cuts off the
load output, then the power system stops working. When the external
AC mains recovers, the system will resume to the normal work state.
(All above monitoring data are system default values that users can
reset).
5. GPE4890B System Properties
| Input |
| Parameter | Min. | Typical | Max. | Unit | Remark |
| Input voltage range | 90 | 220 | 280 | Vac | |
| Input frequency | 45 | 50 | 65 | Hz | |
| Input current | | | 29.7 | A | |
| Power factor | 0.98 | | | | |
| Output |
| Parameter | Min. | Typical | Max. | Unit | Remark |
| Output voltage range | -42 | -53.5 | -58 | Vdc | |
| Output current range | 0 | | 90 | A | 176~280VAC |
| 0 | | 45 | A | 90~175VAC |
| Ripple (Vp-p) | | | 200 | mv | At rated input/output, apply 0.1uF film capacitor and 10uF HF
electrolyte capacitor, oscilloscope band width of 20MHz. |
| Output efficiency | 90 | 92 | | % | 220Vac input |
| 83 | 85 | | % | 110Vac input |
| Regulation | | | ±1 | % | |
| Load regulation | | | ±1 | % | |
| Line regulation | | | ±1 | % | |
| Insulation rating |
| Parameter | Min | Remark |
| Input - output | 2121Vdc/10mA//1min | |
| Input-chassis | 2121Vdc/10mA//1min | |
| Output - chassis | 750Vdc/10mA//1min | |
| Insulation resistance | At normal atmospheric pressure, relative humidity: 90%, testing
voltage: 500vdc, insulation of input-output, input-ground,
output-ground shall not be less than 10MΩ |
| Ambient requirements |
| Parameters | Min. | Typical | Max. | Unit | Remark |
| Operating temp | -25 | | +55 | °C | ≥ 55°C, output with derating power |
| Storage tempStorage temperature | -40 | | +80 | °C | |
| Humidity | 10 | | 90 | % | Relative humidity, no condensing |
| Atmospheric pressure | 70 | | 106 | KPa | |
| Altitude | 0 | | 3000 | m | |
| Cooling method | Forced cooling with fan |
| Mechanical specifications |
| Dimensions (Overall) | 482.6mm×255mm×86.1mm |
| Weight(kg) (Overall) | ≤11kg (Inclusive of module) ≤5.175kg (Frame + Distribution, exclusive of module) |
6. Electric Connection
Chassis connects with external electric through system interface
board. As shown in figure below:
Connector Instruction:
- L,N,PE is power supply three-core AC input port;
- LOAD(+) is load positive, LOAD(-) is load negative;
- BAT(+), BAT(-) are battery port
7. Functions of Monitoring Module
| Item | Remark |
| Remote monitoring of the host | The host can conduct enquiries, settings and control upon the
monitoring and realize the remote message, remote sense and remote
control. |
| Rectifier management by monitoring module | To send controlling orders or to get data from the rectifier module
via RS485 communication. |
| Battery management | To manage low voltage, power down, equalizing/float charge,
temperature compensation of the battery. |
| Output management by monitoring module | To inspect and control the system |
| LED indicator | Signal indication |
| 6 way dry contact output | Dry contact setting |
| COM port signal definition | |
| LCD Display | Set and revise menu |
| For details, please refer to specifications of “GPM48DI”. |
8. Rectifier Module Property
| Item | Unit | Min. | Typical | Max. | Remarks |
| AC input voltage | Vac | 90 | 220 | 280 | |
| AC input voltage frequency | Hz | 45 | 50 | 65 | Rated load |
| Input power factor | | 0.98 | | | Rated voltage/ rated load |
| Output voltage range | Vdc | -42 | -54 | -58 | |
| Output current | A | 0 | 30 | | 176~290V ac Input |
| Output voltage regulation | | | | ±1% | |
| Ripple (Vp-p) | mV | | | 200 | With 0.1uF filmy capacitor and 10uF high frequency electrolyte
capacitor, oscilloscope band width of 20MHz. |
| Output power | W | 0 | 1600 | | 176-280V Input |
| W | 0 | 800 | | 90-175V Input |
| Output efficiency | % | 91 | | | 220V AC Input |
| % | 83 | | | 110V AC Input |
| Input over-voltage protection | Vac | 285 | 305 | | Tested with 15A, auto recoverable |
| Input over-voltage recovery set point | Vac | 280 | | | Hysteresis not less than 5V. |
| Input under-voltage protection | Vac | | | 85 | Tested with 4A, auto recoverable |
| Input under-voltage recovery set point | Vac | | | 90 | Hysteresis not less than 5V. |
| Output over-voltage protection set point | V | -58.5 | -59 | -61.5 | Lock up |
| Output current limiting | A | 32 | 33 | 34 | Auto recoverable |
| Short circuit protection | A | Long-term short circuit endurable; Hiccup when short circuit
detected; Auto recoverable |
| Thermal protection | | Auto recoverable under ambient temperature of 65°C. |
| For details, please refer to specifications of “GPR4830A1”. |
9. Packing and Shipping
Our Delivery Agent
The goods can be shipped by sea, by air, by courier, by land, by
train, etc.
Besides the following delivery agent, we can also look for the
delivery agent with the best price in china if you need us to do
for you.
10. Our Contact Information
Mobile Phone: 0086-13752765943
Telephone: 0086-0755 66600941
Email: info@estel.com.cn
lxf.estel@hotmail.com
Skype: fiona.liang10
