48V Plug-In Frame Power Supply 5U Height 19inch Rack Installation
With 6 Rectifier Module
ET48300-005 construction
ET48300-005 consists of six modules:
Rectifier modulex 6
Battery breakers : 1×125A/1P
Load breakers
LLVD:32A/1P×2+40A/1P×2+63A/1P×3
BLVD:6A/1P×2+10A/1P×2+16A/1P×2
A Rectifier system converts alternating current (AC) to direct
current (DC) and provides the power necessary to charge batteries.
With a focus on continuously improving the total cost of ownership,
ESTEL’s rectifiers, combined with advanced control and monitoring
features, help to reduce both capital and operational expenditure.
Our rectifier systems boast excellent power density while
fulfilling space and weight requirements. They leave plenty of room
for other equipment and create savings in packaging and
transportation costs.
In addition, their high efficiency lowers total energy consumption
and reduces carbon footprint.
The embedded communication power supply system (Rectifier System)
is suitable for small program-controlled switches, access networks,
transmission equipment, mobile communications,
satellite communications ground stations, microwave communications
power supply, and can also be used for power supply for other
communications equipment.
Under normal circumstances, various parameters of the rectifier
module and power distribution unit are controlled by the monitoring
module, and work according to their predetermined parameters or
user commands.
If the mains fails, the system will be powered by the battery at
this time. As the battery discharges, the battery terminal voltage
begins to drop.
When the battery voltage is lower than the 46V dc (Alarm Value can
be settable) battery low-voltage alarm point from monitor, the
monitoring module reports an alarm. Signal,
directly close the load output, the whole machine does not work.
When the external mains power is restored, the system resumes
normal operation.
ET48300-005 consists of distribution unit, rectifier module,
conversion module, monitoring module. The standard as table below:
| Configuration | Rectifier module | Remark |
| Standard | GB 4943 | For details, please refer to the specifications of modules |
| Standard | IEC/EN 62368-1 |
| Standard | EN 55032 Class A,GR1089 Issue 4 ,R3-10, R3-11, R3-12 Class B
certified by North America |
| Standard | EN300386,CLASSA |
18KW 48VDC Rectifier System Quick Details:
| Model | ET48300-005 |
| System | Dimension(mm) | 482.6(W)x350.6(D)x5U(H) |
| Weight | ≤ 50kg(without rectifier module) |
| Cooling mode | Forced air cooling |
| Installation mode | Installed on 19-inch rack or inside the cabinet |
| IP Grade | IP20 |
| AC Distribution | Input voltage | 380VAC three-phase |
| Input capacity | Terminal block 4 bit |
| DC Distribution | Output voltage | -42~-58VDC, rated value: -53.5VDC |
| Maximum capacity | 18kW(6x3000W rectifier module) |
| Battery breakers | 2x125A/1P |
| Load breakers | LLVD:32A/1P×2+40A/1P×2+63A/1P×3
BLVD:6A/1P×2+10A/1P×2+16A/1P×2 |
| DC SPD | 10kA/20kA, 8/20μs(designed inside) |
| Rectifier Module | Input voltage | 85VAC-300VAC, rated value: 220VAC |
| Efficiency | ≥96% |
| Rated power | 3000W(176～300VAC ) |
| Dimension | 106.5mm(W)×286mm(D)×41.5mm(1U/H) |
| Cooling mode | Forced cooling with fan |
| Controller | Signal input | 3 AI(2 battery temp., 1 ambient temp) ,7 DI(SPD, 6 common DI) |
| Alarm output | 6 dry contact |
| Communication port | RS485/LAN Ethernet/SNMP |
| Display mode | LCD |
| Environment | Operating temperature | -40℃~+65℃ |
| Storage temperature | -40℃~+70℃ |
| Operating humidity | 5%~95%(non-condensing) |
| Altitude | 0~3000m(If the altitude is within the range of 2000m to 3000m, the
maximum operating temperature decreases by 1℃ as the altitude
increases by 200m.) |
Product Feature
1) The rectifier module adopts active power factor compensation
technology, and the power factor value reaches 0.99.
2) The normal working range of AC input voltage is wide to 90～290V,
Single Phase, (323V~480V ac, 3 Phase).
3) The rectifier module adopts full-bridge soft-switching
technology, and the efficiency is up to 96%.
4) Smart battery management. There are load power-off and battery
low-voltage protection (LVLD+LVBD) and secondary power-off
(secondary power switch) functions,
which can realize functions such as temperature compensation,
automatic equalization and floating charge control, automatic
voltage regulation, battery capacity calculation, and online
battery testing.
5) The rectifier module adopts non-damage hot-swappable technology,
plug and play, and the replacement time is less than 1min.
6) Networked design, providing multiple communication interfaces
(such as RS485, dry contact), flexible networking, real-limited
local and remote monitoring, unattended.
7) Lightning protection design for AC and DC sides, suitable for
thunderstorm areas.
8) Support fault protection and fault alarm functions.
9) Friendly operation and maintenance can be installed against the
wall, effectively saving space.
10) Ultra low radiation. Adopt advanced electromagnetic
compatibility design.
Our Hybird System Logic Configuration
Product Pictures:
Rectifier Module dimension as below:
| Insulation rating |
| parameter | Standard | Remark |
| Insulating strength(AC input) | Input-Output:3500Vdc/10mA//1min | No flashover or breakdown. Remove discharge tube/surge protection device before testing, no
rectifier module or monitoring module. Output with 2 routes low-voltage terminal, high-voltage with AC
bypass function, not to be tested. |
| Input-enclosure:3500Vdc/10mA//1min |
| Output-enclosure:750Vdc/10mA//1min |
| Insulating strength(DC input) | Input-Output:750Vdc/10mA//1min |
| Input-enclosure:750Vdc/10mA//1min |
| Output-enclosure:750Vdc/10mA//1min |
| Leakage current | ≤3.5mA | 280Vac input,output full-load |
| Insulation resistance | @ Normal atmosphere, relative humidity of 90%, Test voltage of DC
500V,the insulation resistance of input-output, input-ground,
output-ground shall not be less than 10MΩ. Output with 2 routes
low-voltage terminal, high-voltage with AC bypass function, not to
be tested. |
Application
(1) Integration access
(2) Indoor distribution and extension system
(3) Mobile station and extension coverage system
(4) WLAN
(5) Satellite communication ground station and microwave
communication station
(6) Weak current distribution room
(7) Other AC/DC uninterruptible power system
